Finishing Talk Forums - The Online Surface Finishing Community

Industrial production as a whole increased 1.3% in October

info@finishingtalk.com (Finishing Talk News) — Tue, 18 Nov 2008 15:02:35 +0000

Forum: Industry News

parts2clean Trade Fair Dazzles Attendees, Exhibitors

info@finishingtalk.com (Finishing Talk) — Thu, 13 Nov 2008 00:32:46 +0000

Forum: Industry News

Sneak Peek at the 2008 SMF Conference 2008 Attend

info@finishingtalk.com (SFA) — Sun, 31 Aug 2008 00:01:53 +0000

Forum: Industry News

Last Chance to get Special SMF Conference Hotel Rate

info@finishingtalk.com (Finishing Talk) — Tue, 12 Aug 2008 20:13:16 +0000

Forum: Industry News

A Great story about the virtues of being a painter.....

info@finishingtalk.com (skelton) — Thu, 07 Aug 2008 02:10:42 +0000

Forum: Industry News

Urban Water Management - Call for Papers

info@finishingtalk.com (Finishing Talk) — Fri, 11 Jul 2008 20:02:15 +0000

Forum: Industry News

Finishing Today Announces Final Issue

info@finishingtalk.com (Finishing Talk) — Fri, 27 Jun 2008 16:43:06 +0000

Forum: Industry News

Hands on Experience for Inman, SC Chemistry Students

info@finishingtalk.com (Finishing Talk) — Thu, 26 Jun 2008 19:44:41 +0000

Forum: Industry News

New Scholarship for SME Education Foundation

info@finishingtalk.com (Finishing Talk) — Thu, 26 Jun 2008 18:48:45 +0000

Forum: Industry News

2009 Energy Conference - Call for Papers

info@finishingtalk.com (Finishing Talk) — Thu, 26 Jun 2008 18:29:58 +0000

Forum: Industry News

COATING 2008 Opens On-Line Registration

info@finishingtalk.com (Anne Goyer) — Mon, 09 Jun 2008 22:04:17 +0000

Forum: Industry News

PPI Hosts High School Chemistry Students

info@finishingtalk.com (Finishing Talk) — Mon, 09 Jun 2008 21:39:31 +0000

Forum: Industry News

BEST PAPER AWARDS PRESENTED AT ET ’08

info@finishingtalk.com (Finishing Talk) — Mon, 09 Jun 2008 20:41:29 +0000

Forum: Industry News

Lean and Green Summit

info@finishingtalk.com (lean-and-green) — Mon, 02 Jun 2008 18:58:15 +0000

Forum: Industry News

Indy Branch Reception at SUR/FIN 2008

info@finishingtalk.com (Jerry Phillips) — Fri, 30 May 2008 01:04:14 +0000

Forum: Industry News

Coating Short Course Offered

info@finishingtalk.com (Finishing Talk) — Wed, 28 May 2008 21:16:39 +0000

Forum: Industry News

AIRLINE/AEROSPACE SYMPOSIUM CLEARED FOR TAKE-OFF AT SUR/FIN ’08

info@finishingtalk.com (MetalFinishingMagazine) — Tue, 27 May 2008 12:57:16 +0000

Forum: Industry News

Chicago Powder Coating Course is nearly full

info@finishingtalk.com (SFA) — Mon, 19 May 2008 11:07:14 +0000

Forum: Industry News

ELECTROLESS DEPOSITION SEMINARS KICK OFF SUR/FIN 2008 TECH CONFERENCE

info@finishingtalk.com (MetalFinishingMagazine) — Fri, 09 May 2008 19:34:43 +0000

Forum: Industry News

Andrews Powder Coating, Inc. Relocates To Larger Facility

info@finishingtalk.com (powdercoater) — Wed, 07 May 2008 17:40:27 +0000

Forum: Industry News

NOW PLATING PLASTIC!!

info@finishingtalk.com (CAL-TRON) — Wed, 30 Apr 2008 22:22:05 +0000

Forum: Industry News

UV Curing: Put the UV to the Metal

info@finishingtalk.com (zurv) — Tue, 08 Apr 2008 12:11:54 +0000

Forum: Industry News

Society of Manufacturing Engineers Launches Lean Network

info@finishingtalk.com (Finishing Talk) — Tue, 01 Apr 2008 18:21:05 +0000

Forum: Industry News

J.d. Power Chief Economist Named Featured Speaker For Sur/fin Automotive Symposium

info@finishingtalk.com (MetalFinishingMagazine) — Fri, 28 Mar 2008 14:57:59 +0000

Forum: Industry News

Tecumseh Products Leaves Hometown

info@finishingtalk.com (Finishing Talk) — Tue, 25 Mar 2008 20:14:08 +0000

Forum: Industry News

Zinc Factory Fire Sparks Explosions

info@finishingtalk.com (Blakeman) — Sat, 22 Mar 2008 20:45:17 +0000

Forum: Industry News

The Axle Strike continues

info@finishingtalk.com (Finishing Talk News) — Mon, 17 Mar 2008 17:47:18 +0000

Forum: Industry News

Columbia to Merge with Sherwin-Williams

info@finishingtalk.com (finishingmarket.com) — Sun, 16 Mar 2008 15:21:43 +0000

Forum: Industry News

Chrome-Free Aircraft Finishing

info@finishingtalk.com (zurv) — Wed, 12 Mar 2008 12:02:05 +0000

Forum: Industry News

Michael Siegmund Keynote Speech at SMF 2007 Released on Finishing.TV

info@finishingtalk.com (Finishing Talk News) — Sat, 08 Mar 2008 19:31:27 +0000

Forum: Industry News

Blair Vandivier wins NASF Silvio C. Taormina Memorial Award

info@finishingtalk.com (Finishing Talk News) — Sat, 08 Mar 2008 18:52:05 +0000

Forum: Industry News

Miami Power Course Successfully Completed!

info@finishingtalk.com (SFA) — Fri, 22 Feb 2008 15:56:24 +0000

Forum: Industry News

2 Day Powder Coating Course in Charleston, SC

info@finishingtalk.com (SFA) — Mon, 18 Feb 2008 01:20:35 +0000

Forum: Industry News

How to Supervise People - One Day Seminar

info@finishingtalk.com (Finishing Talk) — Fri, 15 Feb 2008 22:06:24 +0000

Forum: Industry News

SFA Announces 2008 Powder Coating Classes

info@finishingtalk.com (SFA) — Thu, 14 Feb 2008 01:43:27 +0000

Forum: Industry News

Key Ingredient to Bright Ni Solutions subject to olympic pressure

info@finishingtalk.com (Martin Michel) — Thu, 07 Feb 2008 09:10:16 +0000

Forum: Industry News

Get Reactive: Benefits of Plural-Component Coatings

info@finishingtalk.com (zurv) — Wed, 06 Feb 2008 13:12:57 +0000

Forum: Industry News

Aluminum Finishing Course- February 25-26, Tempe, AZ

info@finishingtalk.com (NASF) — Tue, 29 Jan 2008 16:49:20 +0000

Forum: Industry News

Dates for the Southern Metal Finishing 2008 Conference Announced!

info@finishingtalk.com (Southern Metal Finishing) — Fri, 28 Dec 2007 16:51:49 +0000

Forum: Industry News

Boeing to purchase billons in Titanium from VSMPO-Avisma

info@finishingtalk.com (Southern Metal Finishing) — Thu, 27 Dec 2007 14:22:28 +0000

Forum: Industry News

Ultracoat, LLC Brings New Operation to NC

info@finishingtalk.com (Finishing Talk) — Tue, 18 Dec 2007 18:44:50 +0000

Forum: Industry News

Finishing Today�s 2007 Innovation Awards

info@finishingtalk.com (zurv) — Mon, 17 Dec 2007 11:30:50 +0000

Forum: Industry News

Final Sur/fin 2007 Tally Tells The Tale

info@finishingtalk.com (MetalFinishingMagazine) — Wed, 12 Dec 2007 13:12:33 +0000

Forum: Industry News

Metal Finishing Managing Editor Resigns

info@finishingtalk.com (Paul Fisher) — Sun, 18 Nov 2007 17:56:35 +0000

Forum: Industry News

9th Annual NASF Carolina Classic Golf Tournament Dates Set for May 15th 2008

info@finishingtalk.com (skelton) — Sat, 17 Nov 2007 04:07:09 +0000

Forum: Industry News

International Trends in the Finishing Industry

info@finishingtalk.com (zurv) — Wed, 14 Nov 2007 11:47:42 +0000

Forum: Industry News

Department of Homeland Security Releases Appendix A List of Chemicals

info@finishingtalk.com (Dedalus) — Sat, 03 Nov 2007 15:30:39 +0000

Forum: Industry News

Paul Skelton joins Carolina Process Control, LLC as Vice President of Operations

info@finishingtalk.com (Carolina Process Control) — Wed, 31 Oct 2007 14:25:29 +0000

Forum: Industry News

SUR/FIN 2008: Call for Papers

info@finishingtalk.com (MetalFinishingMagazine) — Thu, 25 Oct 2007 19:56:25 +0000

Forum: Industry News

4th International Congress of Nanotechnology / Clean Tech Congress 2007

info@finishingtalk.com (Finishing Talk) — Thu, 18 Oct 2007 20:30:33 +0000

Forum: Industry News

Modern CARCs for Military Protection

info@finishingtalk.com (zurv) — Wed, 17 Oct 2007 12:19:16 +0000

Forum: Industry News

A Little Dirt Can Hurt: The Importance of E-Coat Filtration

info@finishingtalk.com (zurv) — Wed, 12 Sep 2007 14:33:51 +0000

Forum: Industry News

Will Askew Now with Haviland / Clariant

info@finishingtalk.com (zurv) — Wed, 29 Aug 2007 08:03:43 +0000

Forum: Industry News

Amos Junior Gainey will be missed by his friends

info@finishingtalk.com (Paul Fisher) — Tue, 21 Aug 2007 22:45:57 +0000

Forum: Industry News

Southern Metal Finishing's Hotel Room Rates

info@finishingtalk.com (Southern Metal Finishing) — Sat, 18 Aug 2007 21:10:25 +0000

Forum: Industry News

Movement to create the "North American Union"

info@finishingtalk.com (Southern Metal Finishing) — Fri, 17 Aug 2007 15:54:53 +0000

Forum: Industry News

Periodic Pulse Reverse Systems for Decorative Copper Plating

info@finishingtalk.com (zurv) — Wed, 15 Aug 2007 12:37:27 +0000

Forum: Industry News

FinishingTalk.com Membership Climbing!!!

info@finishingtalk.com (eboireau) — Mon, 13 Aug 2007 21:25:31 +0000

Forum: Industry News

Treasury Department to take a tougher line against China

info@finishingtalk.com (skelton) — Sun, 12 Aug 2007 05:41:29 +0000

Forum: Industry News

Technic Executive Pleads Guilty to Sabotaging Rohm & Haas TechnologyTest

info@finishingtalk.com (eboireau) — Sat, 11 Aug 2007 22:09:45 +0000

Forum: Industry News

"American Coatings Show" launched

info@finishingtalk.com (Southern Metal Finishing) — Sat, 04 Aug 2007 17:50:45 +0000

Forum: Industry News

SMF Conference to Host Renown Cleaning Authority

info@finishingtalk.com (Finishing Talk) — Tue, 31 Jul 2007 17:25:50 +0000

Forum: Industry News

Sur-Fin 2007 Cleveland Schedule

info@finishingtalk.com (Labrat) — Sun, 29 Jul 2007 16:04:06 +0000

Forum: Industry News

Sur-Fin Association Meeting Schedule

info@finishingtalk.com (Finishing Talk) — Thu, 26 Jul 2007 03:23:07 +0000

Forum: Industry News

Carolina Process Control (CPC) trivalent aluminum chromate conversion coating on QPL

info@finishingtalk.com (Carolina Process Control) — Wed, 25 Jul 2007 15:56:43 +0000

Forum: Industry News

Advanced Finishes for Farm Equipment

info@finishingtalk.com (zurv) — Tue, 24 Jul 2007 11:32:34 +0000

Forum: Industry News

General Motors surpassed Toyota in global sales for 07second quarter

info@finishingtalk.com (Southern Metal Finishing) — Fri, 20 Jul 2007 18:02:27 +0000

Forum: Industry News

Finishing Today Editors Honored with Awards for Excellence

info@finishingtalk.com (Southern Metal Finishing) — Wed, 18 Jul 2007 16:16:03 +0000

Forum: Industry News

BASF South America receives Supplier Award from General Motors

info@finishingtalk.com (Southern Metal Finishing) — Sun, 15 Jul 2007 22:58:05 +0000

Forum: Industry News

Rock & Roll Hall of Fame - NASF SUR/FIN Industry Night Party

info@finishingtalk.com (skelton) — Wed, 11 Jul 2007 05:37:06 +0000

Forum: Industry News

Skelton's Birthday!!!!!

info@finishingtalk.com (skelton) — Tue, 10 Jul 2007 03:06:10 +0000

Forum: Industry News

Luster-On Products Announces QPL Approval for Trivalent Aluminum Chromate Conversion

info@finishingtalk.com (Luster-On) — Sun, 01 Jul 2007 21:19:31 +0000

Forum: Industry News

JacksonLea Finishing Scool

info@finishingtalk.com (Jacksonlea) — Wed, 20 Jun 2007 18:57:26 +0000

Forum: Industry News

8th Annual Carolina Classic (NASF/AESF)

info@finishingtalk.com (biganodes) — Mon, 18 Jun 2007 15:27:39 +0000

Forum: Industry News

Bottom-Line Benefits of Using Prepainted, Coil Coated Metal

info@finishingtalk.com (zurv) — Tue, 12 Jun 2007 20:30:25 +0000

Forum: Industry News

AG Machining Inc. will open a manufacturing facility in Kinston, N.C.

info@finishingtalk.com (Southern Metal Finishing) — Sun, 03 Jun 2007 14:30:32 +0000

Forum: Industry News

Better Control through Automation

info@finishingtalk.com (zurv) — Thu, 31 May 2007 17:40:36 +0000

Forum: Industry News

NASF Announces 2007 Bright Design Challenge Winners

info@finishingtalk.com (Southern Metal Finishing) — Thu, 31 May 2007 06:18:56 +0000

Forum: Industry News

Powder Coating Academy Hits Boston June 12-13

info@finishingtalk.com (Southern Metal Finishing) — Wed, 30 May 2007 15:23:04 +0000

Forum: Industry News

FinishingTalk Calendar

info@finishingtalk.com (biganodes) — Mon, 21 May 2007 21:23:04 +0000

Forum: Industry News

IDSC merges with Haviland Products Company

info@finishingtalk.com (EmilyParkes007) — Mon, 07 May 2007 20:27:10 +0000

Forum: Industry News

powder coating for sale

info@finishingtalk.com (lfzhengyuan) — Wed, 25 Apr 2007 08:34:56 +0000

Forum: Industry News

Project Evaluation Seminar (and dinner!)

info@finishingtalk.com (Aestheticmanav) — Thu, 12 Apr 2007 16:06:02 +0000

Forum: Industry News

SUR/FIN Seeks to Become Industry's 'Global' Event

info@finishingtalk.com (Southern Metal Finishing) — Sat, 17 Mar 2007 14:06:55 +0000

Forum: Industry News

FIN-X �07 Launches Website

info@finishingtalk.com (Southern Metal Finishing) — Thu, 01 Feb 2007 14:39:18 +0000

Forum: Industry News

CCAI Publishes Third Edition of Liquid Organic Coatings Training Manual

info@finishingtalk.com (Southern Metal Finishing) — Wed, 24 Jan 2007 20:41:19 +0000

Forum: Industry News

powder coating educational courses

info@finishingtalk.com (Southern Metal Finishing) — Sat, 06 Jan 2007 19:49:34 +0000

Forum: Industry News

HB Fuller to sell Powder Business to Valspar

info@finishingtalk.com (Southern Metal Finishing) — Fri, 01 Dec 2006 20:38:01 +0000

Forum: Industry News

Metallurgy for the Non Metallurgist course in Rock Hill SC

info@finishingtalk.com (Southern Metal Finishing) — Tue, 31 Oct 2006 16:25:27 +0000

Forum: Industry News

Southern Metal Finishing Conference 2006 was a hit!

info@finishingtalk.com (Southern Metal Finishing) — Mon, 04 Sep 2006 15:01:42 +0000

Forum: Industry News

Largest Online Rectifier Store in the World!

info@finishingtalk.com (zurv) — Wed, 26 Jul 2006 05:55:40 +0000

Forum: Industry News

Canadian Association of Metal Finishers' (CAMF's) 7th Annual Conference & Exhibition

info@finishingtalk.com (zurv) — Fri, 21 Jul 2006 19:43:13 +0000

Forum: Industry News

Metal Finishing Educational opportunities in Charleston

info@finishingtalk.com (Southern Metal Finishing) — Thu, 13 Jul 2006 19:24:51 +0000

Forum: Industry News

Southern Metal Finishing Conference Update

info@finishingtalk.com (Southern Metal Finishing) — Thu, 13 Jul 2006 19:07:07 +0000

Forum: Industry News

Southern Metal Finishing 2006 Agenda

info@finishingtalk.com (Southern Metal Finishing) — Sat, 08 Jul 2006 11:07:04 +0000

Forum: Industry News

Powder Coating Educational Seminar Offered to Colleges

info@finishingtalk.com (Adrienne) — Fri, 16 Jun 2006 18:10:33 +0000

Forum: Industry News

SMF 2006 Conference

info@finishingtalk.com (Southern Metal Finishing) — Sat, 25 Mar 2006 14:57:47 +0000

Forum: Industry News