Finishing Talk Forums - The Online Surface Finishing Community

Rusting spots occur on electroplated lacquered surface after few days.

info@finishingtalk.com (DustinGebhardt) — Tue, 16 Mar 2010 18:40:51 +0000

Forum: Electroplating

Applying copper to brass

info@finishingtalk.com (DustinGebhardt) — Fri, 05 Mar 2010 13:04:02 +0000

Forum: Electroplating

Iron fines and microspalling

info@finishingtalk.com (mark robison) — Wed, 17 Feb 2010 22:28:16 +0000

Forum: Electroplating

Cloudy Ni Sulfamate Deposit With Pitting

info@finishingtalk.com (surtec) — Thu, 11 Feb 2010 21:47:43 +0000

Forum: Electroplating

Chrome plating fiberglass

info@finishingtalk.com (dkunau@novocinc.com) — Thu, 11 Feb 2010 16:48:18 +0000

Forum: Electroplating

Gold plating rubs off in 15-20 seconds!

info@finishingtalk.com (gt214@att.net) — Sat, 09 Jan 2010 16:01:28 +0000

Forum: Electroplating

Electrolytic Nickel Electroplating on tungsten contact rivets

info@finishingtalk.com (veer) — Mon, 28 Dec 2009 07:16:51 +0000

Forum: Electroplating

Nickel on large SS mesh

info@finishingtalk.com (Shane Moore) — Wed, 23 Dec 2009 04:17:46 +0000

Forum: Electroplating

Ni Sulfamate analysis calculation

info@finishingtalk.com (skelton) — Thu, 17 Dec 2009 20:45:31 +0000

Forum: Electroplating

Copper thickness

info@finishingtalk.com (DustinGebhardt) — Mon, 14 Dec 2009 12:33:08 +0000

Forum: Electroplating

Plating onto aluminum bronze

info@finishingtalk.com (Langcourt) — Wed, 09 Dec 2009 19:18:15 +0000

Forum: Electroplating

Asking about copper strike bath

info@finishingtalk.com (DustinGebhardt) — Thu, 03 Dec 2009 19:50:30 +0000

Forum: Electroplating

Anode/Cathode Reversed Definitions in Plating

info@finishingtalk.com (Daniel) — Tue, 01 Dec 2009 22:42:12 +0000

Forum: Electroplating

Silver/Rhodium tips?

info@finishingtalk.com (RhodiumDoctor3) — Thu, 19 Nov 2009 01:44:16 +0000

Forum: Electroplating

Nickel Common Ion Effect

info@finishingtalk.com (Daniel) — Sat, 14 Nov 2009 10:20:12 +0000

Forum: Electroplating

How to remove antiquing spots over metal

info@finishingtalk.com (kapoor1_1) — Mon, 09 Nov 2009 15:31:14 +0000

Forum: Electroplating

Spots over oxidizing/antiquing on brass

info@finishingtalk.com (jimtrottier) — Sat, 07 Nov 2009 20:54:43 +0000

Forum: Electroplating

Anode in the plating of the Applied Research

info@finishingtalk.com (young) — Thu, 29 Oct 2009 13:00:09 +0000

Forum: Electroplating

Look for Business partner(ELECTROPLATING CHEMICALS)

info@finishingtalk.com (jadechem2008) — Mon, 26 Oct 2009 09:32:22 +0000

Forum: Electroplating

Barrel plating nickle

info@finishingtalk.com (DustinGebhardt) — Sun, 25 Oct 2009 20:59:07 +0000

Forum: Electroplating

Pitting in Hard Nickel Solution

info@finishingtalk.com (DustinGebhardt) — Sat, 17 Oct 2009 14:02:31 +0000

Forum: Electroplating

Electroplating Book

info@finishingtalk.com (SFA) — Thu, 15 Oct 2009 20:13:45 +0000

Forum: Electroplating

Duplex chrome

info@finishingtalk.com (Martin1967) — Tue, 13 Oct 2009 10:37:52 +0000

Forum: Electroplating

Etching Aluminum

info@finishingtalk.com (jack) — Sun, 11 Oct 2009 19:40:53 +0000

Forum: Electroplating

electroplating on aluminum

info@finishingtalk.com (Terry) — Wed, 07 Oct 2009 01:08:26 +0000

Forum: Electroplating

Carbonates treatment for silver cyanide solutions

info@finishingtalk.com (DustinGebhardt) — Sun, 04 Oct 2009 02:39:21 +0000

Forum: Electroplating

amperes/ square inch for brass plating

info@finishingtalk.com (DustinGebhardt) — Mon, 21 Sep 2009 18:37:06 +0000

Forum: Electroplating

Nickel plating on heaters

info@finishingtalk.com (Dr. A.) — Mon, 14 Sep 2009 17:56:38 +0000

Forum: Electroplating

analytical method for sodium hydroxide in cad cn solution

info@finishingtalk.com (DustinGebhardt) — Wed, 19 Aug 2009 11:38:21 +0000

Forum: Electroplating

Share electroplating additives formula

info@finishingtalk.com (Bonn) — Mon, 17 Aug 2009 06:07:06 +0000

Forum: Electroplating

is it possible, phopahte pretreatment before electroplating

info@finishingtalk.com (SFA) — Sat, 01 Aug 2009 18:05:31 +0000

Forum: Electroplating

Cyanide copper tarnishing

info@finishingtalk.com (mlm47) — Sat, 01 Aug 2009 09:13:40 +0000

Forum: Electroplating

How do you test for Tin in a plating bath?

info@finishingtalk.com (Nickelanode) — Mon, 27 Jul 2009 22:05:14 +0000

Forum: Electroplating

My new plating consultancy website

info@finishingtalk.com (rajaram60) — Mon, 27 Jul 2009 16:17:55 +0000

Forum: Electroplating

Bronze plating bath

info@finishingtalk.com (jimtrottier) — Fri, 24 Jul 2009 23:27:10 +0000

Forum: Electroplating

Hard chrome plating over Black Chrome (or black nickel)

info@finishingtalk.com (DustinGebhardt) — Thu, 09 Jul 2009 14:17:23 +0000

Forum: Electroplating

hard chrome plating over nickel

info@finishingtalk.com (JASON) — Tue, 30 Jun 2009 14:20:23 +0000

Forum: Electroplating

Optimum Ratios for Zinc Cyanide Bath

info@finishingtalk.com (asad.ilyas) — Tue, 23 Jun 2009 18:00:53 +0000

Forum: Electroplating

DIFFUSE NICKEL CAD PLATING

info@finishingtalk.com (DustinGebhardt) — Thu, 11 Jun 2009 19:54:05 +0000

Forum: Electroplating

having trouble plating aluminun

info@finishingtalk.com (nicknitro) — Wed, 20 May 2009 09:47:49 +0000

Forum: Electroplating

Hard chrrome below 146 Celcium

info@finishingtalk.com (Chrisig) — Tue, 19 May 2009 11:21:04 +0000

Forum: Electroplating

Brass high lite on black finish

info@finishingtalk.com (Nickelanode) — Thu, 14 May 2009 15:39:32 +0000

Forum: Electroplating

solderable coating?

info@finishingtalk.com (AluConsult) — Wed, 13 May 2009 21:09:15 +0000

Forum: Electroplating

Cleaning Copper Bus Bar

info@finishingtalk.com (Greenwood Plating) — Tue, 21 Apr 2009 22:11:45 +0000

Forum: Electroplating

Rissing sulphate levels

info@finishingtalk.com (Rindy Smith) — Thu, 02 Apr 2009 18:28:50 +0000

Forum: Electroplating

Black deposits on dummying

info@finishingtalk.com (Daniel) — Thu, 26 Mar 2009 00:37:51 +0000

Forum: Electroplating

I need help - why Chromate color variation?

info@finishingtalk.com (skelton) — Wed, 25 Mar 2009 23:22:01 +0000

Forum: Electroplating

barrel plating nickel without nickel anodes

info@finishingtalk.com (DustinGebhardt) — Tue, 17 Mar 2009 12:54:34 +0000

Forum: Electroplating

Dummying Tanks before Starting electroplating

info@finishingtalk.com (Dr. A.) — Wed, 25 Feb 2009 13:30:06 +0000

Forum: Electroplating

platinized anode in Cr bath

info@finishingtalk.com (kishanpatel) — Wed, 25 Feb 2009 03:17:56 +0000

Forum: Electroplating

Ni electroplating

info@finishingtalk.com (scientist) — Mon, 23 Feb 2009 20:04:04 +0000

Forum: Electroplating

ElectroPlating Calculator

info@finishingtalk.com (Finishing Talk) — Fri, 20 Feb 2009 14:26:19 +0000

Forum: Electroplating

Electroplating Calculator

info@finishingtalk.com (silversun) — Thu, 12 Feb 2009 15:07:50 +0000

Forum: Electroplating

Carbon treatment to adsorb organic impurities

info@finishingtalk.com (jdekel) — Sun, 08 Feb 2009 17:05:48 +0000

Forum: Electroplating

peeloff

info@finishingtalk.com (DustinGebhardt) — Thu, 22 Jan 2009 13:33:37 +0000

Forum: Electroplating

blackspots in tri-yellow

info@finishingtalk.com (DustinGebhardt) — Thu, 22 Jan 2009 13:27:01 +0000

Forum: Electroplating

How to keep Pink Gold Plating From Tarnishing ?

info@finishingtalk.com (DustinGebhardt) — Thu, 15 Jan 2009 13:05:38 +0000

Forum: Electroplating

Anode to cathode ratio in watts bath

info@finishingtalk.com (Daniel) — Thu, 15 Jan 2009 01:27:56 +0000

Forum: Electroplating

Why is sulfate going down on watts chemistry?

info@finishingtalk.com (DustinGebhardt) — Wed, 14 Jan 2009 15:36:41 +0000

Forum: Electroplating

Tin Lead plating

info@finishingtalk.com (platermike) — Tue, 13 Jan 2009 16:19:48 +0000

Forum: Electroplating

Gold plating - food contact - EU certification

info@finishingtalk.com (indypat) — Wed, 07 Jan 2009 14:40:34 +0000

Forum: Electroplating

Red Dip (Chromate Treatment) Rubbing off Cad plated surface

info@finishingtalk.com (DustinGebhardt) — Fri, 19 Dec 2008 17:39:11 +0000

Forum: Electroplating

Brass spoting

info@finishingtalk.com (Daniel) — Wed, 17 Dec 2008 01:11:32 +0000

Forum: Electroplating

eletrolytic corrosion resistance over aluminum substrate surface

info@finishingtalk.com (DustinGebhardt) — Mon, 08 Dec 2008 14:25:41 +0000

Forum: Electroplating

SEA, ALUMINUM CORROSION RESISTANCE EXPERTISE NEEDED

info@finishingtalk.com (MTM) — Sun, 07 Dec 2008 04:04:18 +0000

Forum: Electroplating

selective Ni on Al: need Japanese plater !!!

info@finishingtalk.com (khartz) — Thu, 04 Dec 2008 21:54:15 +0000

Forum: Electroplating

Electropolishing Systems

info@finishingtalk.com (mefab) — Wed, 26 Nov 2008 07:37:15 +0000

Forum: Electroplating

Liquid/Peelable, Plate Off Masking for Electrocoat Process

info@finishingtalk.com (MilesChemicalSolutions) — Fri, 17 Oct 2008 17:50:06 +0000

Forum: Electroplating

hard chrome plating plantout

info@finishingtalk.com (mgargatti) — Fri, 17 Oct 2008 10:03:20 +0000

Forum: Electroplating

Help with problems in Ni plating

info@finishingtalk.com (DustinGebhardt) — Sat, 04 Oct 2008 18:42:36 +0000

Forum: Electroplating

what is the best dummy for reel to reel electroplating

info@finishingtalk.com (eddy_kuan55) — Tue, 26 Aug 2008 11:45:16 +0000

Forum: Electroplating

Electronic monitoring?

info@finishingtalk.com (DustinGebhardt) — Thu, 17 Jul 2008 10:46:21 +0000

Forum: Electroplating

Nickel Chrome Plating on Aluminum Castins

info@finishingtalk.com (brass-hardware) — Tue, 01 Jul 2008 05:31:00 +0000

Forum: Electroplating

Al Electroplating

info@finishingtalk.com (makgul) — Tue, 27 May 2008 02:17:37 +0000

Forum: Electroplating

Nickel Purification Equipment

info@finishingtalk.com (Harold Evans) — Fri, 09 May 2008 06:36:00 +0000

Forum: Electroplating

Heaters plating up

info@finishingtalk.com (Pat Mentone) — Thu, 08 May 2008 18:39:03 +0000

Forum: Electroplating

Sources for steel balls and plastic balls

info@finishingtalk.com (Shane Moore) — Thu, 10 Apr 2008 02:30:21 +0000

Forum: Electroplating

Troubleshooting Hexavalent Chromium Baths

info@finishingtalk.com (DustinGebhardt) — Sat, 05 Apr 2008 13:45:28 +0000

Forum: Electroplating

Barrel plating larger parts

info@finishingtalk.com (DustinGebhardt) — Sat, 05 Apr 2008 13:42:24 +0000

Forum: Electroplating

Question about aluminum oxide abrasive

info@finishingtalk.com (a57chevytruckman) — Thu, 27 Mar 2008 03:38:53 +0000

Forum: Electroplating

Difference between Nickel Sulphate, Nickel Chloride, Nickel Sulfamate, Nickel Bromide

info@finishingtalk.com (Dedalus) — Wed, 26 Mar 2008 20:38:01 +0000

Forum: Electroplating

Hard Chrome Anodes? STEEL?

info@finishingtalk.com (DaveO) — Thu, 21 Feb 2008 20:19:07 +0000

Forum: Electroplating

Nickel Metal!!!

info@finishingtalk.com (michael hoke) — Wed, 06 Feb 2008 17:46:04 +0000

Forum: Electroplating

current densities/electroforming

info@finishingtalk.com (sewjourner) — Wed, 23 Jan 2008 05:11:47 +0000

Forum: Electroplating

Electrolytic Nickel-Phosphorous Plating Bath

info@finishingtalk.com (Southern Metal Finishing) — Mon, 31 Dec 2007 18:14:48 +0000

Forum: Electroplating

HEX chrome on hard steel

info@finishingtalk.com (overchrome) — Fri, 28 Dec 2007 03:12:41 +0000

Forum: Electroplating

electro galavanizing vs hot dip ????

info@finishingtalk.com (Dedalus) — Mon, 10 Dec 2007 12:53:57 +0000

Forum: Electroplating

Metal Recovery Technology

info@finishingtalk.com (geoc) — Tue, 04 Dec 2007 12:38:31 +0000

Forum: Electroplating

Basics of Electroplating

info@finishingtalk.com (DustinGebhardt) — Sun, 18 Nov 2007 04:24:46 +0000

Forum: Electroplating

hard material

info@finishingtalk.com (skelton) — Sat, 17 Nov 2007 04:10:26 +0000

Forum: Electroplating

Nickel Briquettes vs rounds

info@finishingtalk.com (skelton) — Sat, 17 Nov 2007 03:48:35 +0000

Forum: Electroplating

Alkaline Zinc-Nickel Plating

info@finishingtalk.com (murali) — Sat, 25 Aug 2007 13:19:13 +0000

Forum: Electroplating

About Ebook Electroplating

info@finishingtalk.com (dayat11) — Thu, 23 Aug 2007 06:08:54 +0000

Forum: Electroplating

Starting in plating

info@finishingtalk.com (chrisbyers2005) — Mon, 30 Jul 2007 12:48:51 +0000

Forum: Electroplating

Susan

info@finishingtalk.com (Labrat) — Fri, 11 May 2007 14:15:13 +0000

Forum: Electroplating

new brushplater in kc, hello

info@finishingtalk.com (goldmankc) — Wed, 02 May 2007 23:32:32 +0000

Forum: Electroplating

Hello, looking for Cu on PEEK suggestions

info@finishingtalk.com (Labrat) — Sun, 01 Apr 2007 03:19:23 +0000

Forum: Electroplating

Suggestions and tips for a small in house plating plant.

info@finishingtalk.com (Labrat) — Sun, 01 Apr 2007 02:59:17 +0000

Forum: Electroplating

Hello !

info@finishingtalk.com (Southern Metal Finishing) — Sat, 17 Mar 2007 14:13:28 +0000

Forum: Electroplating

copperplating

info@finishingtalk.com (Labrat) — Tue, 06 Mar 2007 21:42:38 +0000

Forum: Electroplating

Is this suitable power supply for electroplating?

info@finishingtalk.com (emotionless-passion) — Sat, 24 Feb 2007 20:20:54 +0000

Forum: Electroplating

Large, Heavy Item To Bright Nickle Plate.

info@finishingtalk.com (emotionless-passion) — Wed, 21 Feb 2007 23:41:12 +0000

Forum: Electroplating

Very basic electroplating question

info@finishingtalk.com (emotionless-passion) — Wed, 21 Feb 2007 23:32:49 +0000

Forum: Electroplating

A discussion on TAP-Switch Rectifiers

info@finishingtalk.com (Peter van Gorp) — Thu, 14 Dec 2006 19:19:48 +0000

Forum: Electroplating

Plating Carbide

info@finishingtalk.com (Robert) — Thu, 07 Sep 2006 12:09:52 +0000

Forum: Electroplating

Filter recommendation needed

info@finishingtalk.com (CaptainTripz) — Wed, 23 Aug 2006 05:55:10 +0000

Forum: Electroplating

Copper plating + Hard chrome plating - reg

info@finishingtalk.com (Herb Nissen) — Thu, 03 Aug 2006 04:04:14 +0000

Forum: Electroplating

Barrel Plating Acid Copper

info@finishingtalk.com (gromero) — Thu, 20 Apr 2006 18:31:46 +0000

Forum: Electroplating